Als Paintball Discounters
spyder

Spyder Upgrades

tippmann

98 Upgrades

tippmann

A5 Upgrades

tippmann

X7 Upgrades

Name

Stock Angle Kit

Price

$6.95

Brief Description

The JCS Stock Angle Kit allows you to modify your existing JCS folding stock at 0, 6, 8, and 10 degree angles. Improves mask clearance and makes sighting easier. Even if you don't use the sights, this kit brings the marker up higher allowing better sighting. Includes stainless steel mounting bolts.

Quantity:

Add to Cart

Buy

Name

Grip-Mount Stock to Upper Conversion kit

Price

$12.95

Brief Description

This kit allows you to modify your existing grip-mount JCS stock to an upper position stock. It also includes at 0, 6, 8, and 10 degree angles. Improves mask clearance and makes sighting easier. Even if you don't use the sights, this kit brings the marker up higher allowing better sighting. Includes stainless steel mounting bolts. Fits all JCS gun mounts and RVA's in upper position. RVA's 66148, 66149, 66152, and all similar non-RVA gun mounts too!

Quantity:

Add to Cart

Buy

Name

Kit Combat Folding Stock for JCS RVA's

Price

$50.95

Brief Description

for JCS RVA's and gun mounts only
 Already own a JCS RVA? This KIT mounts JCS gun mounts or RVA's which are attached to your marker in the upper position (will not work with grip mounted stocks). This product will not work alone. You get the stock, slide, hinge, and mounting hardware. Just use a 5/32 Allan wrench for installation!

Quantity:

Add to Cart

Buy

Name

COMBAT Folding Stock for Grip Mounting

Price

$50.95

Brief Description

fits Most Any Marker that accepts a drop forward -Steve's original invented in 2000! Current model has updated gun mount bracket.
Black Anodized aircraft aluminum 6591533

Quantity:

Add to Cart

Buy

Name

RIS Fit Grip

Price

$34.95

Brief Description

fits our 7/8 MIL-STD Series or any "weaver style" accessory rail.
Standard Black Anodized.
5/32 Allen required for installation. Rail not included.

Quantity:

Add to Cart

Buy

Name

RIS Spira Grip

Price

$34.95

Brief Description

fits our 7/8 MIL-STD Series or any "weaver style" accessory rail
Standard Black Anodized.
5/32 Allen required for installation. Rail not included.

Quantity:

Add to Cart

Buy

Name

3" x 7/8" MIL-STD Accessory Rail

Price

$14.95

Brief Description

for MKX8™ markers
This is a direct replacement for the 3 inch composite receiver rail included with the MKX8. Precision machined from solid aluminum bar and black anodized. This rail will provide a solid professional mount for any higher end accessory. Included: 1 Aluminum Rail. All other hardware is included with the marker.

Quantity:

Add to Cart

Buy

Name

6" x 7/8" MIL-STD Accessory Rail

Price

$17.95

Brief Description

This is the stand alone rail. It is the same rails as in kit 73245 and 73242. You get the rail ONLY and it WILL NOT MOUNT to your marker by itself. You must specify in the notes section if you want NON-anodized. Standard 73220 orders are Black anodized. The variety of holes are counter-sunk for 3mm x 0.5mm pitch Flat-Head machine screws. Machined from aircraft aluminum.

Quantity:

Add to Cart

Buy

Name

1" Offset Bar Clamp kit

Price

$8.60

Brief Description

for 7/8 Dovetails
Used in 7/8 " JCS Rail Kit Accessory Mounting Rails
This offset clamp mounts to 7/8 MIL-STD rails. Gap on rail (that this clamp mounts to) must be 0.204 inch minimum width.

Quantity:

Add to Cart

Buy

Name

1" Offset Bar Clamp Kit

Price

$8.60

Brief Description

fits 3/8 Dovetails
This handy little bar clamp secures to 3/8 dovetails of any paintball marker. The holes are tapped for 3mm x 0.5mm pitch machine screws. Machined from aircraft aluminum. Includes bar, clamp, and stainless hardware. Qty One bar assembly per package.

Quantity:

Add to Cart

Buy

Name

Round On-Center Clamp for 3/8" Dovetail

Price

$8.95

Brief Description

for 3/8 Dovetails
This handy little bar clamps securely to 3/8 dovetails of any paintball marker. The holes are tapped for 3mm x 0.5mm pitch machine screws. Machined from aircraft aluminum. Includes Round Rail Mount, clamp, and stainless hardware. Qty One clamp assembly per package

Quantity:

Add to Cart

Buy

Name

1.5" x 7/8" MIL Standard RAIl for 3/8" Dovetails

Price

$19.95

Brief Description

clamps on center to any 3/8 Dovetail
This Universal rail is about 1.5 inches long and is machined from solid aluminum, then black anodized. Professional design let you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a Phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

3" x 7/8" MIL Standard RAIL for 3/8" Dovetails

Price

$24.95

Brief Description

clamps on center to any 3/8 Dovetail
This versatile rail is 3 inches long and is machined from solid aluminum, then black anodized. Professional design let you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a Phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

6" x 7/8" Black Anodized Assembly Mount for 3/8" Dovetails

Price

$29.95

Brief Description

clamps on center to any 3/8 Dovetail
This Universal rail is 6.13 inches long and is machined from solid aluminum, then black anodized. Professional design let you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a Phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

1.5" Offset x 7/8" MIL Standard RAIl for 3/8" Dovetails

Price

$19.95

Brief Description

clamps to any 3/8 Dovetail and provides 1 inch offset from center
Is that hopper in the way? This useful sight rail is about 1.5 inches long, has about inch offset from center, can be mounted left or right, and is machined from solid aluminum and then black anodized. The SATIN finished sight rails match the Spyder e99 matte finish nearly perfect. This design lets you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a Phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

3" Offset 7/8" Accessory Mount

Price

$24.95

Brief Description

clamps to any 3/8 Dovetail and provides 1 inch offset from center
Here's a 3 inches long universal sight rail with 7/8 or 1 inch offset positions from the center of the gun to the center center of the sight rail, and is machined from solid aluminum and then black anodized. The SATIN finished sight rails match the Spyder e99 matte finish nearly perfect. Professional grade design let you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a Phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

6" Offset 7/8" Accessory Mount

Price

$29.95

Brief Description

clamps to any 3/8 Dovetail and provides 1 inch offset from center
At 6 inches long, this universal sight rail can be mounted in either 7/8 or 1 inch offset positions from the center of the gun to the center center of the sight rail, and is machined from solid aluminum and then black anodized. The SATIN finished sight rails match the Spyder e99 matte finish nearly perfect. Professional grade design let you clamp to any standard 3/8 dovetail. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver", "Picatinny", or "7/8" mount. Securely installs with a phillips medium (#1 size) screw driver to provide a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

1.5" MIL STD Rail x 7/8" Offset Rail Kit Black

Price

$24.95

Brief Description

clamps to 7/8" wide MIL-STD Rails with slot - provides 7/8" offset from center
The JCS MIL to MIL 1.5" long rail kit. This universal rail kit can be mounted in many configurations. This shorty rail is good for small lights, lasers, and even grips. Use two to spread the mounting location of longer scopes. Provide 4 rail locating positions: on-center, 3/8 offset, 7/8 offset and 90 degree mount to end of clamp. This rail is machined from solid aluminum and black anodized. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver" style, "Picatinny" style, or "7/8" mount. Securely installs with a phillips medium (#1 size) screw driver and provides a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

3" MIL STD Rail x 7/8" Offset Rail Kit Black

Price

$27.95

Brief Description

clamps to 7/8" wide MIL-STD Rails with slot - provides 7/8" offset from center
The JCS MIL to MIL 3" long rail kit. This universal rail kit can be mounted in many configurations. Provide 4 rail locating positions: on-center, 3/8 offset, 7/8 offset and 90 degree mount to end of clamp. This rail is machined from solid aluminum and black anodized. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver" style, "Picatinny" style, or "7/8" mount. Securely installs with a phillips medium (#1 size) screw driver and provides a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

6" MIL STD Rail x 7/8" Offset Rail Kit Black

Price

$33.95

Brief Description

clamps to 7/8" wide MIL-STD Rails with slot - provides 7/8" offset from center
The JCS MIL to MIL 6" long rail kit. This universal rail kit can be mounted in many configurations. Provide 4 rail locating positions: on-center, 3/8 offset, 7/8 offset and 90 degree mount to end of clamp. This rail is machined from solid aluminum and black anodized. We call our rails the "JCS 7/8 Modified-MIL-SPEC-1913 Accessory Mount". It accepts any quality accessory that requires a "Weaver" style, "Picatinny" style, or "7/8" mount. Securely installs with a phillips medium (#1 size) screw driver and provides a rigid accessory mount.

Quantity:

Add to Cart

Buy

Name

Bi-Pod

Price

$64.95

Brief Description

fits any barrel 7/8" dia to 1" dia
Black Anodized. Clamps securely to any barrel that is 7/8" diameter up to 1inch diameter. Leg are adjustable from about 6" to 9-1/2". Only weighs 200g (or 0.44 pound). Tools required for assembly are a 5/32 allen wrench and a 3/8 socket. Pat. Pending

Quantity:

Add to Cart

Buy

Name

3" x 3/8" Dovetail Accessory Rail

Price

$7.95

Brief Description

This rail measures about 1/2 inch across the top of the 3/8 dovetail. This is the same dovetail dimensions as most paintball markers and competition air guns have. JCS Rails are machined from solid bar stock and designed for professionals... without the high price tag. Many competition air gun users have bought our rail kits. This part includes one 3 inch long rail. Drilled and counter bored holes are for M3 x 0.5mm flat head machine screw. Black anodized aircraft grade aluminum.

Quantity:

Add to Cart

Buy

Name

6" x 3/8" Dovetail Accessory Rail

Price

$12.95

Brief Description

This rail measures about 1/2 inch across the top of the 3/8 dovetail. This is the same dovetail dimensions as most paintball markers and competition air guns have. JCS Rails are machined from solid bar stock and designed for professionals... without the high price tag. Many competition air gun users have bought our rail kits. This part includes one 6 inch long rail. Drilled and counter bored holes are for M3 x 0.5mm flat head machine screw. Black anodized.

Quantity:

Add to Cart

Buy

Name

3" long x 3/8" Dovetail x 1" Offset - Black

Price

$19.95

Brief Description

clamps to any 3/8 Dovetail and provides 1 inch offset from center
The JCS 3 inch long 3/8 dovetail rail for 3/8 dovetails fits any marker with a 3/8 dovetail. This sight mounting rail is precision machine black anodized aluminum. Designed to mount in a variety of configurations, this rail offsets 5/8 or 1 inch off center, so you can see around vertical feed hoppers. JCS Performance Upgrade. Requires #1 Phillips Screwdriver for installation.

Quantity:

Add to Cart

Buy

Name

6" long x 3/8" Dovetail x 1" Offset - Black

Price

$24.95

Brief Description

clamps to any 3/8 Dovetail and provides 1 inch offset from center
The JCS 6 inch long 3/8 dovetail rail for 3/8 dovetails fits any marker with a 3/8 dovetail. This sight mounting rail is precision machine black anodized aluminum. Designed to mount in a variety of configurations, this rail offsets 5/8 or 1 inch off center, so you can see around vertical feed hoppers. JCS Performance Upgrade. Requires #1 Phillips Screwdriver for installation.

Quantity:

Add to Cart

Buy

Name

MKX8 Valve Seal

Price

$13.95

Brief Description

Assembly drawing part number 74. This is an original replacement valve seal part for the MKX8 "engine".

Quantity:

Add to Cart

Buy

Name

Foregrip Composite MIL-STD Accessory Rail kit for MKX8

Price

$24.95

Brief Description

for of MKX8™ markers
 Here's everything you need to mount your favorite accessory to the foregrip of any MKX8™. Includes two 6 inch composite MIL-STD rails, one 3 inch composite MIL-STD rail, and mounting hardware.

Quantity:

Add to Cart

Buy

Name

Pro Foregrip Aluminum Accessory Rail kit for MKX8

Price

$44.95

Brief Description

for MKX8™ markers
 Looking for a more professional mount? Everything you need to mount your favorite military accessory to the foregrip of any MKX8™. Includes two 6 inch ALUMINUM MIL-STD rails, one 3 inch ALUMINUM MIL-STD rail, and mounting hardware.

Quantity:

Add to Cart

Buy

Name

O-Ring Maintenance kit for MKX8 Engine

Price

$10.95

Brief Description

assembly drawing parts # 75,77,85
 This handy kit includes enough o-rings to perform 20 maintenance procedures. Great to have on-hand when your in the field. Includes all o-ring's (hard and soft) used on MKX8 markers.

Quantity:

Add to Cart

Buy

[Home] [Paintball Markers] [Marker Upgrades] [BeOrangeD] [Custom Products Upgrades] [Dangerous Power] [Dead On] [Engler Customs] [GXG] [JCS] [Kingman Spyder] [New Designz] [Planet Eclipse] [Redz] [Smart Parts] [Tacamo] [Tadao] [Tiberius Arms] [Tippmann] [Virtue] [Warrior] [WDP] [Marker Parts] [Gas Systems] [Goggles] [Barrels] [Harness] [Loaders] [Playing Gear] [Bags] [Mines/Grenades/Launchers] [Field Supplies] [Media] [Casual Apparel] [Contact Us] [Policies]